Blog

Save Your Basement With A Sump Pump Alarm

After all the rain and storms, the flooding level has risen a lot, and many people are looking for alternative options to remove the flooding in their basements.

Many people call for emergency services when the water fills out the basement as it could be harmful to the walls in the home. Heavy flooding could also make the building collapse so it is necessary to remove water instantly in the condition.

No one plans until their basement is flooded and People only think when the basement flooding raises the knees. Removing water from the basement could cost more money, and it would be a huge headache.

Flooding in the basement would be a difficult choice so with the advancement in technology, installing the Sump Pump could be the best option for removing water.

Many numbers of Sump pump systems are available in the market, but it is necessary to choose the branded and operational one for removing the water from the basement.

The Sump Pumps can remove more volume of water in a short time so that it is possible to avoid any building collapse.

Features Of Sump Pump Alarm:

Sump Pump Alarm is designed with the latest technology that is quite helpful for removing water under heavy storms. Sump Pump Alarm is Extremely Sensitive, and it detects the water at 1/32″ deep when the alarm is placed on the floor.

The pump Alarm system will be wall mountable so that the device can also be attached near sinks, water heaters, or other areas. Installing the Sump Pump Alarm into sump pump pits will be useful to get a warning of potential problems.

The Loud alarm of 110 decibels can be heard throughout the house. The device is an excellent Battery Saver that only keeps a 9-volt battery for a fresh longer.

Sump Pump Alarm relies on the home electrical system for operation, so when you lose the power for the sump pump, it would be a crucial time during heavy rain and storms. Instant alerts would be sent to the Smartphone about the Water Detection as well as Power Outage.

Sump pump alarm Save Power And Time:

Sump Pump Alarm works perfectly side-by-side with the battery backup systems, and the device is completely brand-neutral.

The device has the technology to alert even when the backup system fails, and it provides an additional level of protection for any water damage.

A Loud Sound Alarm is enabled when the water is detected, and chirps sound for low battery levels, and receives message notifications. Sump Pump Alarm is helpful in all aspects of alerting about the rise in the water level in the basement so that it ensures that everyone in the home is alert.

When the battery backup pump power gets low for the Sump pump, an appropriate alert will be provided for removing the water from the basement.

If you haven’t lost power completely, and the power circuit works perfectly for the pump, then you probably don’t have enough voltage/outlet so it is necessary to opt for an alternative method.

Blog

Selecting and Maintaining Tips Of Sump Pump

A sump pump is deemed to be the heart of a cellar or basement waterproofing structure. This electrically operated device guarantees your basement is free of humidity.

It drives the water out of the basement whenever the water accumulates in the sump pit in the ground. A battery backup sump pump plays a significant role and is employed to pump out water that is collected in the sump.

Water goes into the gathering pit when it rains or from the basement sanitation channeling into the sump pool. Sump pumps are ideally aimed to drain the sewage water from the home into the municipal system.

While considering the question of selecting a sump pump, one should follow some of the important points. A submersible pump should be preferred over a pedestal pump if your sump basin is of a wider area size.

Submersible Sump pumps are advantageous because they permit the sump pit to be topped with the covering, which results in reduced noise and prevents the rubbish from dropping into the pit.

An appropriately sealed cover additionally helps to keep away the humid air that is discharged. A pump with a cast iron core is preferred over a plastic product because it contributes to removing the heat and the life span of the pump is extsumppumpguides.netended.

To reduce the possibility of clogs, the pump ought to have a no-screen intake style, additionally with an impeller that deals with the solid particle of about half an inch in diameter.

A mechanical switch is preferable over a pressure switch, and also the float is desired to be solid so it can’t become wet, to keep it safe.
After you have installed an appropriate sump pump, proper maintenance is of utmost importance to keep it working and to avoid any failures and emergencies.

The most important thing about support is to ensure that the unit is always clean. To avoid any mechanical hazards, it is very significant regularly to check the outlet of the sump pump so you can learn if there is some clogging or obstruction.

Similarly, the inlet should also be checked regularly to avoid such problems. Nowadays, automatic sump pumps are very common, for maintenance and smooth operation of such pumps, it is advised to test the float bimonthly or at least once in three months, to ensure that there is no clogging.

This will keep the sump pump safe and prevent the problems that can result from blockage. Bear in mind that sump pumps should regularly be tested if weather conditions are severe. When the pump is running, it should not produce any unusual noises.

If such a thing is noticed, it should be checked thoroughly. In case your sump pump does not need to be operated around the year, before approaching its operational season, check it by filling it with water.

In the case of a failure, it is much dangerous to inspect or repair it without turning off the power supply. An appropriately selected sump pump with size and type can last more than three years, even up to ten years, if it is properly maintained.

Blog, Maintain Tips

Sump Pumps Maintenance and Inspection Tips

Sump pumps provide peace of mind to countless homeowners who live in high water table areas or areas otherwise prone to flooding. They’re the first, and in many cases only, line of defense many of these homeowners have against the scourge of basement flooding. But they’re not indestructible. Sump pumps require regular maintenance to ensure they’re able to answer the call when the water starts to rise. For the most part, sump pump maintenance is pretty straightforward but just because it’s an easy DIY project doesn’t mean it can be ignored. Below we’ll look at a half dozen maintenance tips from sump pump guides that will help keep your sump pump humming along for years to come.

sump pump maintenance tips

Tips to Keep Your Sump Pump Pumping

Sump pumps are the unsung heroes of the modern home. How sump pumps work is nothing short of fascinating While we dine or watch movies or take long lazy naps upstairs the sump pump is in the basement keeping a watchful eye over groundwater levels and snapping to attention should it detect trouble. Do your sump pump, your home, and your family a favor by following these 6 simple sump pump maintenance tips:

  1. Clean the pit around the pump – The pit should be completely free of all dirt and debris. Failing to keep the sump clean could result in a clogged impeller or discharge tube which can cause the pump to fail when you need it most.
  2. Inspect the float – It’s important that the float be properly positioned. That it not be pinched in any way or have its movement obstructed by other objects. The float needs to move freely up and down or the pump could be rendered useless.
  3. Inspect the drain line – If the drain line is corroded or damaged in some way water that’s supposed to be pumped out of the basement will spill back in and you’ll have a flood on your hands. Inspect the line carefully for any signs of damage.
  4. Check the power cords – Make sure the pump cords aren’t in a position to potentially get tangled with the float. If the cords are dangling free use a zip tie or some other method to bind them together away from any moving parts on the pump.
  5. Make sure the lid is sealed properly – It’s important that the lid to the sump pump be fastened down securely at all times (except when you’re conducting maintenance of course). If the lid is loose or was not put back for some reason the pit can become a trash can that collects clothes dropped from the laundry basket, dirt, toys, and more.
  6. Back up your pump – It’s not uncommon for the power to go out during floods. When this happens the sump pump goes out just when you need it most. You can prevent this by installing a battery-operated backup sump pump that can be activated if the main pump is down.

A word of caution: Make sure you unplug the sump pump before doing any maintenance on it and don’t forget to plug it back in when you’re finished.

Blog, Maintain Tips

How To Install A Sump Pump – Sump Pump Guides

There are many stages to installing a sump pump. Here, we cover a few of the basics to get you started.

  • You Need a Sump Pit – A sump pit must be dug to create a space large enough and with a diameter sufficient to lift a sump pump down into it. The outlets usually connect at the top and lead upwards, so the space required isn’t much more than the widest diameter of the chosen sump pump.
  • Creating a Sump Pit – A sump pit must be dug by first digging up the floor if it’s already been put in. A jack hammer is required to do this. If the floor is just ground soil, then dig a hole deep and wide enough to house a sump pump. The position of the pit must be over 10 -inches away from the foundation flooring to satisfy building codes.

Install A Sump Pump

  • Fitting the Pump – Gravel may or may not be needed to be added to the bottom of the sump pit. That depends on the manufacturer’s instructions and the particular model. Alternatively, a paver made of concrete may be required instead. A check valve will also need to be fitted to the discharge outlet on the pump using hose clamps.
  • Arranging the Discharge – Some PVC pipe is required which will connect from the check valve to the elbow PVC connector. A pipe will then connect from the PVC elbow to a basement wall that’s part of the foundation. It will be necessary to drill through the rim joist to access the siding on the exterior to place the pipes through. At that point, the exterior pipes can be directed to move the flow to the drainage using more pipes and other connectors, as required.