When compared to submersible sump sumps, Pedestal ones are different because they sit elevated above the sump water position.
There is either a float sensor or a switch that prompts the pump to turn on once the water reaches the designated level. With homeowners, the best pedestal sump pump is advantageous when compared to other options because of its flexibility when removing water from a sump basin.
The sump pumps themselves are typically long and slender, so they’re easy to recognize compared to their submersible cousins. Depending on the model, parts will be made of cast iron, stainless steel, bronze, or another strong metal that protects the inner workings and increases its useful life.
Each model offers a different available horsepower to deliver increased suction power when it’s needed the most (usually when the basement is flooding, and the homeowner is in full-scale panic mode).
With greater horsepower, basements and other areas that are flooded get cleaned up sooner which helps avoid additional water damage due to painfully slow water removal. Something well worth considering when looking to cut costs with a cheaper, less powerful pump.
5 Best Pedestal Sump Pump Comparison Chart
|Where To Buy
|Stainless Steel, Cast Iron
|Superior Pump 92551
The 5 Greatest Pedestal Sump Pumps
- Flotec FPPM3600D-01/09 1/3 HP Pedestal Sump Pump
- Wayne SPV500 1/3 HP 3,100 GPH Pedestal Sump Pump, Cast Iron
- Superior Pump 92301 1/3 HP Cast Iron Pedestal Pump
- Zoeller 84-0001 Old Faithful 84 Pedestal Pump, 1/2 HP, 115V
- Do it Pedestal Sump Pump
[wpsm_titlebox title=”1″ style=”3″]
Flotec FPPM3600D-01/09 1/3 HP Pedestal Sump Pump
The Flotec FPPM3600D-01/09 is a reliable sump pump from one of the best brands in the market. The model has a 1/3 horsepower which helps it keep up when a basement is flooding quickly.
Without the need to lift water, up to 3,480 gallons each hour is pumped out and 2,460 gallons each hour is disposed of when moving the water 10 feet above basement level. A 12-inch diameter is required for clearance to place the pump into position and begin pumping out water.
This makes the model ideal for enclosed spaces where other pumps like a submersible one would not be able to fit at all. A 3.5-amp power supply is necessary to run the pump. There is a thermal sensor to protect against overloads that turns off the motor if it gets too hot to prevent the circuitry from blowing out.
A 115-120 VAC outlet (GFCI-type) is required, and this model comes with a decent 6-foot power cord to reach the far side of a room. The FPPM3600D-01/09 model remains operational at temperatures between 35F and 77F.
A meshed screen prevents debris in the water from clogging up the works and stopping the pump from operating. Accordingly, the impeller is a non-clogging version to maintain the same level of suction power.
A 1 ¼-inch discharge outlet keeps the water moving. The unit is manufactured using both cast iron and stainless steel parts to offer greater durability than other inexpensive competing products.
The item is purchasable on its own or with an agreement for an installer to deliver and install the unit for the homeowner. It is worth noting that there is no battery backup supplied with this device.
This Flotec model is an excellent option to enable flooded basements to be cleaned quickly and efficiently. We consider this the top pedestal sump pump available at the time of writing.[/wpsm_titlebox]
[wpsm_titlebox title=”2″ style=”3″]
Superior Pump 92301 1/3 HP Cast Iron Pedestal Pump
The Superior Pump 92301 is a reliable model that offers some exciting features. To begin with, it is capable of pumping out 3,000 gallons per hour to clear the water from a flooded basement and to keep on doing so.
There is a switch that floats and triggers the 1/3 horsepower motor to kick into action. The switch is sensitive and is adjustable to suit the homeowner.
The pump is powered by a 2.76-amp, 120-volt AC outlet. The air-cooled motor has copper windings and built-in thermal protection to avoid it overheating and blowing out; the motor will turn off to let it cool down. There is a split capacitor at work here helping out the continuous duty feature of the engine.
For additional durability, the main body of this sump pump is made from cast iron or thermoplastic to protect it. There is an impeller and drive shaft made from anti-corrosive stainless steel, a stainless steel float ball as part of the switch mechanism, and a one ¼-inch FIP discharge capacity too.
The power cord is a generous 10 feet long and is waterproofed. Liquids from cold up to 180F are managed by the pump to suit hot or cold days. The model is designed for sump basins that are at least 12 feet or later. With the water pump running at full capacity, water is lifted up to 20 feet above ground level.
There is a manual power switch that is clickable at the top of the motor housing to manually test the product. It is a useful extra beyond the automatic activation via the stainless steel float ball system.
It’s advisable to manually test the pump before completing an installation. It is also worth noting that there is no battery backup supplied with this device.[/wpsm_titlebox]
[wpsm_titlebox title=”3″ style=”3″]
Wayne SPV500 1/3 HP 3,100 GPH Pedestal Sump Pump, Cast Iron
The Wayne SPV500 is a high-quality product from a manufacturer that’s been involved with producing many types of pumps for decades. This pedestal sump pump is a 1/3 horsepower, cast iron one that is both rugged and robust.
With a maximum outflow of 1 ½-inch NPT discharge rate, up to 3,100 gallons of water is pumped out every hour with this model.
The pump is also even narrower than the one reviewed above with only an 11-inch diameter required to fit it into position. Given its slender design, the Wayne SPV500 can accommodate even smaller, less accessible basements and other areas that are flooding.
The sump pump is protected with a cast iron casing. The long column is made from coated steel, and fasteners made of durable stainless steel hold it all together. This product is built to last with the use of quality components.
There is a 2-pole float switch that offers a dependable response through its basic on/off option that turns the pump on when the water level reaches too high and turns it back off again when the water level has reduced appropriately.
The motor also has some protection to ensure it’s able to maintain the 1/3 horsepower and its full suction capabilities. It is a high-torque one for improved power distribution.
It has thermal limits placed on it to avoid it overheating during use where it’ll switch off to avoid burning the engine burning out. It is worth noting that there is no battery backup supplied with this device.[/wpsm_titlebox]
A pedestal sump pump is an indispensable tool to add to a house’s basement to avoid the risk of the home becoming flooded. The use of this type of sump pump instead of a submersible one is helpful when access to the sump basin is fairly restrictive, or there is limited space to install a larger device.
With self-cleaning systems that avoid clogging, a pump is less likely to break down. However, with the greater accessibility of a pedestal sump pump, that’s also easier to fix than with a submersible one.
We have reviewed three of the top pedestal sump pump products on the market. They’re not the only ones available, but they offer some of the best features and excellent value, without sacrificing important performance where it counts.